The new MILOS MT-PA5030 PA fly tower was designed for live events that require a compact PA fly tower for small systems that can be used both indoors and outdoors. Set up is easy. Only a few 290 QTV truss components are needed to erect the tower and only 2 persons are required to accomplish this feat. Due to a height of just under 5 meters, approvals by authorities are not necessary. The design allows for placement of base cabinets or amplifier racks on top of the outriggers. Key benefits - Footprint at set up is 2.5 x 2 m 8.2' x 6.6' (width x depth) - Max. load 300 kg (660 lbs) - 1.5 m2 (16.15 ft2) max. front surface area of the PA - 1.0 m2 (10.76 ft2) max. side surface area of the PA - 50 kg (110 lbs) required ballast - 20m/s (45 mph) in-service wind loading - Out-of-service wind loading as per DIN-EN 13814 - Base frame is V-shaped steel centrepiece with set of 2 bespoke and 2 long MT2 outriggers - Lifting operations with either electrical or manual chain hoists - Head block equipped with double pulley system for attachment of safety chain or safety wire parallel to lifting chain. - Multiple attachment points on base for connection of hoists and safeties