The new MILOS MT-PA5030 PA fly tower was designed for live events that require a compact PA fly tower for small systems that can be used both indoors and outdoors.
Set up is easy. Only a few 290 QTV truss components are needed to erect the tower and only 2 persons are required to accomplish this feat. Due to a height of just under 5 meters, approvals by authorities are not necessary. The design allows for placement of base cabinets or amplifier racks on top of the outriggers.
Key benefits
– Footprint at set up is 2.5 x 2 m 8.2′ x 6.6′ (width x depth)
– Max. load 300 kg (660 lbs)
– 1.5 m2 (16.15 ft2) max. front surface area of the PA
– 1.0 m2 (10.76 ft2) max. side surface area of the PA
– 50 kg (110 lbs) required ballast
– 20m/s (45 mph) in-service wind loading
– Out-of-service wind loading as per DIN-EN 13814
– Base frame is V-shaped steel centrepiece with set of 2 bespoke and 2 long MT2 outriggers
– Lifting operations with either electrical or manual chain hoists
– Head block equipped with double pulley system for attachment of safety chain or safety wire parallel to lifting chain.
– Multiple attachment points on base for connection of hoists and safeties
